Multifunctional controller in a extended configuration.
MODULE | ESP32 (ESP-WROOM-32) | |
---|---|---|
PROCESSOR | Name | Tensilica Xtensa LX6 |
Bitness | 32 bits | |
Number of cores | 2 | |
Clock rate | 80 ... 240 MHz | |
COPROCESSOR | ULP (Ultra low power co-processor) | |
MEMORY | ROM | 448 Kb |
RAM | 520 Kb | |
RTC Fast | 8 Kb | |
RTC Slow | 8 Kb | |
eFuse | 1 Kb | |
Flash | 4 MB | |
INTERFACES | UART | 3 pcs. 2 are labeled on the board, any ports can be used |
I2C | 2 pcs. 1 is labeled on the board, any ports can be used | |
SPI | 4 pcs. 1 is labeled on the board, any ports can be used | |
I2S | 2 pcs. 1 is labeled on the board, any ports can be used | |
ANALOG-TO-DIGITAL CONVERTER | Type | Sar |
Bitness | 12 bits | |
Number of outputs | 6 | |
DIGITAL-TO-ANALOG CONVERTER | Bitness | 8 bits |
Number of outputs | 2 (optional) | |
WIRELESS COMMUNICATION | Wi-Fi | 802.11 b/g/n |
Maximum Wi-Fi data transfer rate | 150 Mbps | |
Wi-Fi operating frequency range | 2.4 ... 2.5 GHz | |
Bluetooth | v4.2 BR/EDR and BLE | |
Maximum Bluetooth data transfer rate | 4 Mbps | |
Audio codecs support | CVSD, SBC | |
POWERED BY AN EXTERNAL SOURCE | Supply voltage | 8 to 30 V |
Maximum load current A 5 V voltage converte | 5 A | |
Maximum load current A 3.3 V voltage converter | 1 A | |
Protection against incorrect polarity | Yes | |
Short circuit protection | Yes | |
POWERED BY USB | Supply voltage | 5 V |
Maximum current consumption | 1 A |