IoTik 32B

Multifunctional controller in a extended configuration.

Special features

ESP32 (ESP-WROOM-32)
240 MHz, 32-bit, dual-core Tensilica Xtensa LX6 processor
Wi-Fi
Up to 150 Mbps with 802.11 b/g/n support
Bluetooth
v4.2 BR/EDR and BLE
Electrical protection
Built-in sensors
Hall and temperature sensor
Flash Memory
4 MB of fast, non-volatile memory
MicroSD connector
Support up to 32GB
IR receiver
Allows receiving signals from the control panel

Description

The YoTick 32B controller is based on ESP32 microcontroller with built-in Wi-Fi and Bluetooth. This allows implementation of various IoT projects without the use of additional modules to connect to IoT platforms. The controller is compatible with various expansion boards for Arudino, allowing you to connect a wide range of sensors and actuators.

Technical specifications

MODULE ESP32 (ESP-WROOM-32)
PROCESSOR Name Tensilica Xtensa LX6
Bitness 32 bits
Number of cores 2
Clock rate 80 ... 240 MHz
COPROCESSOR ULP (Ultra low power co-processor)
MEMORY ROM 448 Kb
RAM 520 Kb
RTC Fast 8 Kb
RTC Slow 8 Kb
eFuse 1 Kb
Flash 4 MB
INTERFACES UART 3 pcs. 2 are labeled on the board, any ports can be used
I2C 2 pcs. 1 is labeled on the board, any ports can be used
SPI 4 pcs. 1 is labeled on the board, any ports can be used
I2S 2 pcs. 1 is labeled on the board, any ports can be used
ANALOG-TO-DIGITAL CONVERTER Type Sar
Bitness 12 bits
Number of outputs 6
DIGITAL-TO-ANALOG CONVERTER Bitness 8 bits
Number of outputs 2 (optional)
WIRELESS COMMUNICATION Wi-Fi 802.11 b/g/n
Maximum Wi-Fi data transfer rate 150 Mbps
Wi-Fi operating frequency range 2.4 ... 2.5 GHz
Bluetooth v4.2 BR/EDR and BLE
Maximum Bluetooth data transfer rate 4 Mbps
Audio codecs support CVSD, SBC
POWERED BY AN EXTERNAL SOURCE Supply voltage 8 to 30 V
Maximum load current A 5 V voltage converte 5 A
Maximum load current A 3.3 V voltage converter 1 A
Protection against incorrect polarity Yes
Short circuit protection Yes
POWERED BY USB Supply voltage 5 V
Maximum current consumption 1 A

Interfaces

IoTik 32B pinout

Platform compatibility

GreenPL
Blynle
ThingWorx

Programming

Arduino IDE
Trik Studio

Use cases

Kits
Create training suites
Prototyping
Practice your devices to perfection before public launch
Robotics

Where to buy